PREORDER - Inflatable Werewolf Suit

We are taking preorders until January 31st, 2025. We need to reach a minimum of 10 orders to do the run. If for some reason we don't reach it, we will refund everyone's order.

------------------

Because this is a bulk order we are placing with the factory, the price is much lower. After the preorder is over, this suit will go back to its normal price of $1266.10. 

This suit was designed by KronoGarrett & AsG_Alligator that is made to look like a Werewolf. 

You can play with the interactive 3D model here: https://sketchfab.com/3d-models/thermal-werewolf-dae98e7aca464edfa19382519f7abb46

It comes with patches of perforated holes in the eyes of face (where the inner and outer layers come together) so that you can see, breath, and even talk. Two small inflatable pieces inside the face area form an inflatable mask to hold the inner layer away to make breathing easy. Entry is accessed by a zipper on the back of the suit. 

You can choose from one of the 6 predefined colors or if you hire AsG_Alligator (telegram: @AsG_Alligator or BlueSky:@asgalligator.bsky.social) to make a custom color, you can choose "other".

It is made out of 0.4mm pvc on the outside and Your choice of 0.4mm or the ultra soft shiny black 0.2mm PVC (like we did on the insides of the hyena suits) on the inside. If you choose the 0.2mm black material, you can choose either shiny or matte.

You can choose the type of print. If you want the outside to feel very slick, rubbery and look glossy, choose "digital print" but know it takes special care so that the print is never left wet or with moisture while folded or touching itself for long periods (it requires inflating the suit to dry after washing it) to prevent print transfer. If you would rather have an incredibly durable print, choose "soft-UV". It's "soft" compared to the older technology of UV printing was was very hard. But it is no where near the slick and rubbery feel of digital print. Soft-UV is a better option for looks and durability. It has more of a matte look. 

This price includes creation of suit, testing, and reinforcement of weak spots.

The Suit in the photos was made using Soft-UV printing (which is not as soft as the digital printing). It has a protective layer that is very durable. But it also makes the material slightly more stiff and matte looking. If you choose Digital Printing, it is very slick feeling and also very rubbery when you grab it. Digital printing has some nice perks but you must take very good care of it while cleaning and drying. While the material is wet, it must not be allowed to dry while touching other printed areas or the print will transfer. This is not something that happens if the material simplay gets wet, it is when it is left to dry for a period of time while wet and touching other printed areas. To avoid this, it must be inflated immediatly after washing with the print on the outside so that it can dry while inflated. Once the outside is dry, you should use a sock with cornstarch or similar powder inside it and with a knot tied at the end so that you can lightly dust the printed side. It is easiest to do this after you turn it inside out to let the inner layer dry. Reach inside with the sock and lightly dust all the printed areas. This will keep the print looking brand new for a long time. 

On this suit, you can choose if you want the head attached or detached (no zipper option for zipping on the head).

Size Guide

Though it doesn't usually take that long, due to the number of orders we receive and the small size of our company it can take up to six months to receive your order.

Squeeze level: Enthusiast