After we have received your order we will contact you for additional measurements using the email address provided at checkout.
------------------
This is a suit is designed by AsG_Alligator that is made to look like a Triceratops.
It comes with patches of perforated holes in the eyes of face (where the inner and outer layers come together) so that you can see, breath, and even talk. Two small inflatable pieces inside the face area form an inflatable mask to hold the inner layer away to make breathing easy. Entry is accessed by a zipper on the back of the suit.
You can choose from 2 diffeeent build qualities:
Overlapping seams - made like our hyena, tiger and sheep suits. Most color is printed except for black and white. Printing can be done with either digital (materials is very rubbery and slick feeling and shiny looking but care must be taken to keep the print looking good) or Soft UV printing (not as soft as digital print but very durable). Outside is 0.4mm pvc and inside is our ultra-rubbery shiny 0.2mm custom PVC. A step up from the pinched seams.
Reinforced butt-seams - Made by the factory that makes our Blimps and Rings. Nearly indestructible seams. These suits can take a severe beating! Made out of a very soft white 0.4mm pvc inside and out. Most color is printed except for black and white. Printing can be done with either digital (materials is very rubbery and slick feeling and shiny looking but care must be taken to keep the print looking good) or Soft UV printing (not as soft as digital print but very durable).
The green Triceratops Suit in the photos was made using digital printing. You can see how shiny this makes the suit look. And it is very slick feeling and also very rubbery when you grab it. Digital printing has some nice perks but you must take very good care of it while cleaning and drying. While the material is wet, it must not be allowed to dry while touching other printed areas or the print will transfer. This is not something that happens if the material simplay gets wet, it is when it is left to dry for a period of time while wet and touching other printed areas. To avoid this, it must be inflated immediatly after washing with the print on the outside so that it can dry while inflated. Once the outside is dry, you should use a sock with cornstarch or similar powder inside it and with a knot tied at the end so that you can lightly dust the printed side. It is easiest to do this after you turn it inside out to let the inner layer dry. Reach inside with the sock and lightly dust all the printed areas. This will keep the print looking brand new for a long time. The other option is to use soft-UV (which is not as soft as the digital printing!) as it has an protective layer that is very durable. But it also makes the material slightly more stiff and matte looking.
On this suit, you can choose if you want the head attached or detached (no zipper option for zipping on the head).
This price includes creation of suit, testing, and reinforcement of weak spots.
Squeeze level: Enthusiast
